STUDIO OCEAN MARK

 DESIGN

●SUPER SPOOL FREE
This system is the newest free spool system in the market.
While in the spool free setting,the spool is 100% free floating,this will allow you to sink jigs just as fast as using a spinning outfit.

●ECONOMIZER (ONLY L50)

There are two economizers included with the reel. They are made from nylon resin and glass fiber.

You can hold 300m of PE#4 and 300m of #3exactly, and when you go on an expedition, simply remove the economizer and you can hold an additional 100m of #4 or an additional 300m of #3 PE line, which will allow you to fish a little bit harder than with the economizer attached. 

●ADJUSTABLE HANDLE ARM
The handle arm is made from high grade aluminum and is adjustable to three lengths!

L120 Hi/Lo	:	95mm/83mm
L50	:	90mm/78mm/65mm

●AIR GLOBE SHAPE (NEW AG45) HANDLE KNOB (ONLY L50&L120Hi)
The shape of this handle knob allows for more secure and powerful reeling than ever before, and also due to the flat face of the handle knob it allows for less stress than a traditional round style knob.

●AIR EGG SHAPE (AE100) HANDLE KNOB

AIR EGG SHAPE Handle knob {Only available on our Low gear model}

We are using an EVA rubber coating on our all new AE100 handle knob. This coating helps to keep the knob light and slip resistant.

This T-bar shaped knob allows you to get 100% power out of your low geared reel.

●NON-SYMMETRICAL FRAME
When designing our machined cut reel we thought of not only looks but also about ergonomics.
Palming of the reel is one of the most important designs in our mind. A non-symmetrical frame allows for a more natural feel while reeling and less stress at the grind.

●ROUND BRIDGE
The inside frame design we are using is called "round bridge".
This round bridge design helps keep line lay smooth and troubleless.
Non-stress reeling.

TOUGHNESS

●ALUMINUM MACHINE CUT FRAME

●ANGULAR CONTACT BEARING
With the help from a local bearing manufactorer,we produced this truly strong and time tested bearing. The max performance bearing period.

●SUPER STRONG ONE WAY BEARING
This bearing can stand up to the most heaviest jigs available. This bearing will guarantee there will be no backwards slipping even at 50+ kilos. Also we are using water proof rubber on the bearing to prevent backwards slipping.

●STAINLESS STEEL HIGH MODULAS GEAR
Same type of gear found in large sized trolling reels. Made out of extremely strong stainless steel, but to everyones suprise, it is very light in weight. The gear is attached to the main shaft by a screw. This gear was made for jigging.

●STAINLESS HANDLE SHAFT
Handle shaft is made out of 10mm superstrong stainless steel. This handle is extremely heat and corrosion resistant. Also it is very light in weight.

DRAG

●ALUMINUM DRAG DISC
This disc helps prevent your drag from heating up and malfuctioning.We have also sanded the face of these discs. Nice and smooth drag performance is our goal.

●HEAT RESISTANT CORK DRAG WASHERS
These washers are heat resistant and can handle a pounding. From speedy tuna all the way to those torkfull amberjacks, these washers can take it.

●KILO SET LEVER
On our L50 reel series you get 0.5kg per drag click. You will get an additional 2kg in the max drag position. With our L120 series reel you will get 1kg per drag click and also 2 additional kilograms in the max drag position.

●SPOOL CLICK
The spool will make a clicking sound when the drag is operating.

●TEFLON GREASE
We use teflon grease because it has extremely long life,does not stick,helps reduce heat and it is also works well in saltwater conditions.

MAINTENANCE

●SPOOL CHANGE
You can change the spool with the use of one minus screwdriver.

●DRAG WASHER REPLACEMENT
Replacement of drag washers is simple.

●ONE WAY BEARING REPLACEMENT
Compared to other types of reels, jigging reels bearings have a shorter life expectancy. So we made it easier to replace those bearings.

●GREASE UP
Grease ups made simple. You can get to the drive gear through the right cover cap making grease ups a sinch!

PICTURE 1 

PICTURE 2